型号：SL-25
SL-25
19英寸机架的解决方案
sl-25编码器是一个19英寸的1U高系统，有两个连接的以太网连接，可以用8乘以
3g/4g调制解调器进行扩展。
slg-25是SNG卡车理想的备份解决方案，同时也支持任何有连接无线连接的视频车辆。
该系统支持DHCP和固定IP号配置，并有一个单独的LCD触摸屏用于管理和配置。
该系统还可以通过视频管理器门户面板进行管理，从而可以配置最大的比特率、视频分辨率和延迟。
使用场景
使用连接互联网、
3g/4g和/或卫星连接，如BGAN和KA波段，使用汽车或地点的实时上行链路。
支持SNG卡车的解决方案
通过公共互联网(ISDN不再需要)实时广播报告
解决方案
该解决方案可以通过后端服务器交付给点或点。
后端服务器有两种风格。
基本后端服务器可以处理2个sl45编码器和2个编程序系统，并存储最多25个小时的D1视频(取决于硬件版本)。
高级服务器可以处理20个sl25编码器和20个编程序系统，并存储100个小时的D1视频(取决于硬件版本)。
Specifications
INTERFACES
- 2x Ethernet 10/100/1000 base-t
- SD;SD- SDI,SD-HDMI, 4 x analog audio balanced
- HD;HD- SDI,HD-HDMI
- Jack IFB/Audio return
- 5 X USB
INPUTS
- SD; full D1, Pal and NTSC mode
- HD; 720p50, 720p60 and 720p59,94
- HD; 1080i50, 1080i60 and 1080i59,94
SUPPORTED ENCODING
- H.264 main profile MVP codec
- H.265 per license
- Framerate 50, 60, 59, 94
CONNECTIONS
- Ethernet
- Wifi (optional)
- No build in sim modems, upgradable with max 8 modems
RECORDING
- 120 Gigabyte (can be higher on request)
- SD: High quality CBR in SD while broadcasting adaptive live stream
- HD: High quality CBR in HD while broadcasting adaptive CIF live stream
HARDWARE
- Dedicated appliance 220 volt
- Weighs approximately 2,5 kilograms
- 1U 19” rackmount
OPERATIONS SETTINGS
- Live: Adaptive encoding and bitrate change with three options or with a slider (optional), with configurable delay between 1*-60 seconds (* On software version 17.4)
- Store and Forward: send over contents of an USB stick to a FTP server
- Recording: CBR encoding at 30 Mbit on internal or external SSD disk
- Satellite and Satellite + 3G: Specific modes to optimize transmission over BGAN and KA satellite. With Satellite +3G we can keep the delay at 1.8 seconds using 3G/4G modems for the return channel and IFB.
- Disabled/Data bonding: In this mode the unit is a true data bonding unit for high speed uploads and Internet access. Also in the other modes data connectivity is available but live video gets prioritized.
- PostPro license (optional): In this mode the system records next to a high res CBR a low res proxy file which can used for remote editing and only partial retrieve
INCLUDES
- PSU 90-220 Volt AC to 12 Volt DC
